Table of Contents
Advertisement
sSATA Port 0-3 Hot Plug
Select Enabled to support hot-plugging on the port specified by the user, which
will allow the user to replace an sSATA drive without shutting down the system.
The options are Disabled and Enabled.
sSATA Port 0-3 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRE-
SET initialization to the device. The options are Disabled and Enabled.
Port 0-3 sSATA Device Type
Use this item to specify if the sSATA port specified by the user should be con-
nected to a solid state drive or a hard disk drive. The options are Hard Disk
Drive and Solid State Drive.
Server ME (Management Engine) Configuration
This feature displays the following system ME configuration settings.
•
Operational Firmware Version
•
Recovery Firmware Version
•
ME Firmware Features
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
PCIe/PCI/PnP Configuration
The following PCI information will be displayed:
•
PCI Bus Driver Version
PCI Devices Common Settings:
PCI PERR/SERR Support
Select Enabled for the system to log an error event when a PERR (PCI/PCI-E Parity
Error) or a SERR (System Error) occurs. The options are Disabled and Enabled.
7-21
Chapter 7: BIOS
Advertisement
Table of Contents
