Table of Contents
Advertisement
S
S
UPER
ERVER 6018R-MD/MDR User's Manual
T-SGPIO 0/1 Headers
Two T-SGPIO (Serial-Link General
Purpose Input/Output) headers are
included to communicate with the en-
closure management chip in the system.
I-SGPIO1 supports onboard I-SATA 0-3
ports, while I-SGPIO2 supports I-SATA
4/5. See the table on the right for pin
definitions.
Standby Power Header
The +5V Standby Power header is lo-
cated at JSTBY1 on the serverboard.
See the table on the right for pin defini-
tions. (You must also have a card with
a Standby Power connector and a cable
to use this feature.)
Serial_Link-SGPIO
Pin Definitions
Pin#
Definition
1
NC
3
Ground
5
Load
7
Clock
NC = No connection
Standby PWR
Pin Definitions
Pin#
1
2
3
5-18
Pin
Definition
2
NC
4
DATA Out
6
Ground
8
NC
Definition
+5V Standby
Ground
No Connection
Advertisement
Table of Contents
