Table of Contents
Advertisement
3
ADvAnCED OPErATIOn
Other functions
D Pocket Beep function
The Pocket beep function sounds a notification tone and indication when a call is received.
L This function is set by your dealer, or in the Set mode.
L " " is displayed when the function is On.
L " " blinks and the notification beep sounds when a call is received. It blinks until the transceiver return to the standby
mode after a received signal disappears.
D P-Bell function
The P-Bell function sounds the notification tone when a call is received.
A received call is muted until you reply. After pushing [PTT], the mute is released.
L This function is set by your dealer, or in the Set mode.
L " " is displayed when the function is On.
D Lone Worker function
When the Lone Worker function is activated, the Emergency Call function (p. 3-6) is automatically turned On
after the transceiver has been left without any operation for the specified period of time.
NOTE: The Lone Worker function may not properly work, depending on the surrounding environment such as
obstructions, weather condition, and so on.
Icom is not responsible for the destruction or damage caused by using the Lone Worker function.
3-7
Advertisement
Chapters
Table of Contents
