Icom IP501M Operating Manual page 22

4
Set moDe
Using the Set mode
You can use the Set mode to set infrequently changed values or function settings.
the transceiver has 2 types of Set mode, as shown below.
L You cannot transmit or receive while the transceiver is in the Set mode.
D Basic Set mode
z Hold down [FUNC] for 3 seconds to enter the Set mode.
• "Set" is displayed.
D Detailed Set mode
1. Hold down [FUNC] for 3 seconds to enter the Set mode.
• "Set" is displayed.
2. Hold down [FUNC] for 3 seconds again to enter the Detailed Set mode.
• "Set (Detail)" is displayed.
D Using the Set mode
1. Push [FUNC] or [Address] to select an item.
2. Rotate [DIAL] to select an option.
L Pushing [Call History] may be required to apply the selected option.
See page 4-3 to 4-6 for details.
3. Push [Ptt] or [CLR/Lock] to exit the Set mode.
4-2
Set
LoG
– – –
Set(Detail)
LoG
– – –