Using The Address Book; Dselecting A Call-To Party From The Address Book; Dselecting A Call-To Party From The Call History - Icom IP501M Operating Manual

2
BASiC OpeRATiON

Using the Address book

You can select a call-to party from the Address book or Call history.
D Selecting a call-to party from the Address book
The [Address] key can be used, depending on a preset. Ask your dealer for details.
About the call type:
All call: Transmit to all of the transceivers that belongs to the network.
Group call: Transmit to the transceivers that belongs to the same group.
Talkgroup call: See page 3-4 for details.
individual call: Transmit to an individual transceiver.
Telephone call: Transmit to an ip phone.*
*Transmittable, depending on the presetting.
1. push [Address] to display the Address book.
• The Address book is displayed.
2. push [Address] several times to toggle the call type.
L Displayed call type may differ, depending on the presetting.
All → Group → Individual → Telephone
3. Rotate [DiAL] to select a call-to party.
4. While holding down [pTT], speak at your normal voice level.
D Selecting a call-to party from the Call history
The transceiver's each Call history stores a maximum of 10 logs.
1. push [Call History] to display the Call history.
• The Call history is displayed.
2. push [Call History] several times to toggle the log.
L Displayed log may differ, depending on the presetting.
Tx log → Rx log → Tx MSG log → Rx MSG log → Tx Call log → Rx Call log
3. Rotate [DiAL] to select a call-to party.
4. While holding down [pTT], speak at your normal voice level.
NOTE: You can delete logs in the Set mode. See page 4-3 for details.
2-3
Group
10001
Sales 1
Rx log
10/3 13:37
Sales 8