Emergency Call Function - Icom IP501M Operating Manual

3
ADvAnCED OPErATIOn

Emergency Call function

You can receive or transmit Emergency Call if the function is assigned to the Option key or [Call History] key.
Ask your dealer for details.
Transmitting:
L The instruction is based on the case that the function is assigned to the Option key.
1. Hold down the Option key until "Emergency" is displayed.
• An alarm sounds periodically.
L If the Silent mode is enabled by your dealer, no alarm sounds, and no emergency
indication is displayed.
2. Wait for the answer-back.
• When the transceiver receives an answer-back, the alarm stops, and the [TX/rX] indicator
lights green.
L To cancel the emergency call, hold down the Option key until "Emergency" disappears, or
turn OFF the transceiver.
Receiving:
1. "Emergency" is displayed and the alarm periodically sounds.
L When the Silent mode is enabled by your dealer, no alarm sounds.
2. While holding down [PTT], talk into the microphone.
• While holding down [PTT], the [TX/rX] indicator lights red.
• The alarm stops.
• returns to the Standby screen when you release [PTT].
NOTE: The Emergency function may not properly work, depending on the
surrounding environment such as obstructions, weather condition, and so on.
Icom is not responsible for the destruction or damage caused by using the Emergency
Call function.
3-6
Emergency
Sales2
Emergency
Sales1