Macurco DVP-120C Manual
5.3.1 Serial RS-485 to USB Wiring
•
Connect the required Data A, Data B and Common (Ground), and shield (if available) to the 4 pin BACnet
connector.
NOTE: The color code for your cable may be different than the one shown here, reference the user manual for your
specific cable for accurate wiring information.
•
Plug the USB connection into the USB port of your computer, install any necessary drivers for the USB to
RS-485 Serial Converter cable.
REV – 1.0
Figure 5-3 BACnet Connection
Figure 5-2 RS-485 to USB
[34-8708-4770-8 ]
55 |
P a g e