Setting Up Windows Embedded Studio; Installation - Eurotech Apollo Quick Start Manual

APOLLO Windows XP Embedded Quickstart

Setting up Windows Embedded Studio

Eurotech Ltd's Windows XP Embedded APOLLO Development Kit is supplied with a
pre-built image of the Windows XP Embedded operating system. In cases where the
pre-built image doesn't offer suitable functionality, Microsoft Windows XP Embedded
Studio can be used to customise the existing image or to create a completely new one.
The Target Designer extensions supplied on the Development Kit DVD support
Windows XP Embedded SP2 Feature Pack 2007.
Target Designer extensions for the following devices and utilities are supplied on the
support DVD:
•
Intel network controller drivers.
•
Intel embedded graphics driver.
•
Vinyl AC97 codec for sound support
•
Atmel Trusted Platform Module
•
PCI Uart driver (COM3 and COM4)
•
Eurotech Ltd ArcTouch touchscreen application.
•
Eurotech Ltd Enhanced Write Filter Manager application.
•
Startup logo.
•
Microsoft Foundation Class Library for Visual Studio 2003.
•
Microsoft Visual C++ Native Remote Debugging Tools.
•
Microsoft TweakUI application
The DVD also contains configuration information for Microsoft Windows XP Embedded
Studio that enables the pre-built image to be reproduced or used as the basis for a
custom configuration.
A copy of Microsoft Windows XP Embedded Studio which consists of Target
Designer and Component Designer is included as part of the Development
Kit. These tools let you create time-limited (120 days) evaluation versions of
the XP Embedded operating system.
A full copy of Microsoft Windows XP Embedded Studio, must be obtained from
a Microsoft distributor.

Installation

Install Microsoft Windows XP Embedded Studio SP2 Feature Pack 2007 on the
development PC and then install the APOLLO Target Designer Extensions package
from the APOLLO Windows XP Embedded Development Kit DVD.
© 2007 Eurotech Ltd Issue E
Setting up Windows Embedded Studio
.
31