Eurotech Apollo Quick Start Manual page 30

APOLLO Windows XP Embedded Quickstart Reinstalling the supplied Windows XP Embedded image
11 Type the following command to begin programming the Intel USB Flash Disk with
the image that was originally preloaded onto the APOLLO:
\TOOLS\CFCLONE\CFCLONE SEALED.BIN E:
12 When the Intel USB Flash Disk has been programmed, type EXIT.
13 Click on the START button, and select TURN OFF COMPUTER.
14 Power on the APOLLO, and press F2 to enter the BIOS.
15 Navigate to the Boot section using the
Hard Disk is selected as the first boot device. If you need to change the order, you
can do so using the + and – keys.
16 Navigate to the Exit section using the
Changes and press Enter.
Windows runs through the final part of its 'First Boot'. It takes approximately 5 minutes
for the desktop to appear. Once this is complete, the APOLLO is back to its original
factory settings.
Incorrect use of the CFCLONE tool could result in you overwriting any other
disks connected to your APOLLO. Make sure that you follow the instructions
carefully, and are specifying the correct drive for the Intel USB Flash Disk.
© 2007 Eurotech Ltd Issue E
and arrow keys, and make sure that
and arrow keys, select Exit Saving
30