Install the mirror mounting bracket to the tractor cab using supplied hardware.
Cut the muffler shield 4-1/2" from the top of the shield to accomodate the bracket
on the muffler. Install the exaust support bracket to the muffler using supplied
hardware as shoen below. Refer the parts section for the details.
MIRROR BRACKET
FRONT WORKLAMP RELOCATION
1. Cut the right side front hand rail from the bottom of worklamp to the bottom of
the hand rail.
2
Bend the hand rail inside to avoid the boom collision with the worklamp.
ASSEMBLY
INSTALLING MIRROR BRACKET
EXAUST SUPPORT BRACKET
Assembly Section 2-7
MUFFLER
MUFFLER SHIELD