Security Configuration - Avalue Technology EBM-APL User Manual

EBM-APL User's Manual
USB Mass Storage Driver Support
USB transfer time-out
Device reset time-out
Device power-up delay

3.6.2.12 Security Configuration

Item
TXE HMRFPO
TXE EOP Message
52 EBM-APL User's Manual
Disabled
Enabled[Default]
1 sec
5 sec
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Options
Enabled,
Disabled[Default]
Enabled[Default]
Disabled
Enable/Disable USB Mass Storage Driver
Support.
The time-out value for Control, Bulk, and
Interrupt transfers.
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller.
'Auto' uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.
Description
TXE HMRFPO.
Send EOP Message Before Enter OS.