Table of Contents
Advertisement
Combination Dial Function
When a dial registered as a Combination Dial is used, you can enter the dial number
following the Combination Dial.
Setting a Combination dial:
To register One Touch Dial No. or Speed Dial No. as a Combination Dial, enter the '+'
symbol (One Touch Dial key 27[&]) after One Touch Dial number or Speed Dial number.
1
2
3
4
5
6
7
Using the Combination Dial
1
2
3
4
For example: Use the Keypad to input the other numbers(67890) to complete this
combination dial. (The symbol '+' will disappear automatically)
Then press the "Start" key to perform the transmission.
Basic Fax Operations
•
To obtain detailed results of a transmission, print the TX Result Report.
Press "Program" key 3 times.
Press '2' of Keypad, then the message "2 SPEED DIAL" appears briefly.
Input the Speed Dial No.
Input the Fax number by pressing the Keypad.
Press the One Touch Dial key 27(&) after the Fax number, the display would shows
the '+' symbol.
Press "Yes" key.
The display shows a message to confirm the Speed Dial is programmed as shown.
Press the "Reset" key to go back to the initial state.
Place the document into the Document Feeding Tray.
Check that the Fax screen is shown. If not, press the "Copy/Fax" key to switch.
Press "Speed Dial" key. Enter the NO. which registered as a Combination dial.
•
The display shows the number programmed in Speed Dial, followed by the
symbol '+', indicating that it is a Combination Dial.
Enter the other numbers using the dialing as shown:
•
Dial No. (Keypad) + "Start" key
•
One Touch Dial (which has not yet been registered as a Combination Dial)
•
Speed Dial and Keypad
Note: The following applies to Combination Dial.
•
When a One Touch Dial or "Speed Dial" key is used after a Combination Dial,
Transmitting a Document
3 - 9
Advertisement
Table of Contents
