Table of Contents
Advertisement
4
5
6
7
8
Free Size or Custom Paper Size
1
2
3
4
5
6
7
8
9
10
11
Making Copies
Press the "No/Clear" key to select the non-standard paper size
Use the left or "Right Arrow" keys to select the desired paper type you wanted
•
PLAIN: Regular paper
•
OHP:Transparencies(A4/Letter)
•
CARD: Thick paper.
Press the "Yes" key to accept the selection.
Use the left or "Right Arrow" keys to select the paper size (standard) you want.
•
LT: Letter
•
LG: Legal
•
HL: Half Legal
Press "Yes" key to accept the selection.
Set the original document, using the ADF or the Exposure Glass.
Adjust the Document Guide Plates to the original document. Insert the original paper face
up into the tray until it stops.
Select the Manual Bypass Tray by pressing the "Paper" key.
Press the "No/Clear" key to select the non-standard paper size
Use the left or "Right Arrow" keys to select the desired paper type you wanted
•
PLANE: Regular paper
•
OHP:Transparencies (Letter)
•
CARD: Thick paper.
Press the "Yes" key to accept the selection.
Press the "Down Arrow" key to select Free Size.
Press "Yes" key to accept the selection.
Using the keypad, enter the width "x" direction length of the paper.
Press the "Yes" key to accept the value entered.
Using the keypad, enter the length "y" direction length of the paper.
Selecting Paper Tray
2 - 5
Advertisement
Table of Contents
