Gdi Enhance - Lanier 5415MFD Operator's Manual

GDI Enhance

GDI Enhance
Allows users to select the GDI printer driver which supports 600 dpi. Additional memory is
necessary for printing documents at 600 dpi.
1
2
3
4
11 - 2
Note: If your unit generates a "MEMORY FULL" report while attempting to
print a document using PCL4 emulation, or the Window GDI Driver and does not
print your document, your unit requires additional memory.
Note: Since the fax unit must be turned OFF when switching to PCL4 emulation
or Windows GDI Driver, make sure that any documents stored in memory are
printed out first.
Press the PROGRAM Key and scroll through the
menus until you reach the Set Printer menu and
press YES.
Press 7 or scroll down to the PCL4 Enhance menu
and press YES.
Select either ON or OFF depending on your needs.
Press YES to accept this data into memory.
If you chose YES, you must restart your unit to
make this change active.
SET PRINTER?
YES / or 1-8
8 GDI ENHANCE?
OK=YES
ON *OFF
-SELECT&PUSH"YES"-
PCL4/GDI CHANGE
RESTART YOUR FAX
Printer