Sort Function
Sort Function
When using the Sort function, multiple copies are copied in sets and in sequential order.
.
Sort mode and Non-Sort mode can be switched by pressing the"Sort" key. When Sort mode is
selected the Sort indicator lights up. The default setting is Sort mode. This setting is effective untill
the Panel Reset is performed.
1
2
3
2 - 10
Note: Installation of the Automatic Document Feeder and expansion memory is
required for this function.
Place the original document in the ADF.
Turn ON Sort function by pressing the "Sort" key
•
The Sort indicator lights up.
Press the "Start" key.
•
Copies are assembled as sets in sequential order.
Making Copies