Tools - Epson Stylus PHOTO 950 Service Manual

EPSON Stylus PHOTO 950
Models which use the HAV cartridges should be transported
C A U T I O N
with the cartridges removed. In particular, when transporting
by air, the drop in atmospheric pressure can cause ink to flow
through the head into the cap and result in ink leaking.
Therefore the ink cartridges should always be removed during
transportation.
Use only recommended tools for disassembling, assembling or
adjusting the printer.
Apply lubricants and adhesives as specified. (See Chapter 6 for
details.)
Make the specified adjustments when you disassemble the
printer. (See Chapter 5 for details.)
Make sure the tip of the waste ink tube is located at correct
position when reassembling the waste ink tube. Otherwise it will
cause ink leakage.
DISASSEMBLY AND ASSEMBLY

4.1.2 Tools

Use only specified tools to avoid damaging the printer.
Table 4-1. Special Tool List
Upper Case Opener
Phillips Screw Driver (No.1)
Phillips Screw Driver (No.2)
Tweezers
Overview
Revision A
Name
93