Ink System Unit Removal - Epson Stylus PHOTO 950 Service Manual

EPSON Stylus PHOTO 950

4.2.4 Ink System Unit Removal

1. Remove the Printer Mechanism. (Refer to Section 4.2.1.3.)
2. Move the carriage unit manually to about the middle position.
3. Remove the six screws 6) C.B.S 3x6 that are securing the ink system unit (cap unit
and pump unit) to the printer mechanism, and then remove the ink system unit
together with the bracket.
Ink System Unit
[Right side]
Figure 4-28. Ink System Unit Removal
DISASSEMBLY AND ASSEMBLY
6) C.B.S 3x6
6) C.B.S 3x6
Disassembly
When installing the ink system unit, the tabs on the bracket should
C A U T I O N C A U T I O N C A U T I O N
be inserted into the printer mechanism.
Dowels
[Left-front side]
Figure 4-29. Ink System Unit Installation
Revision A
107