Special Settings Mode (*1) - Epson Stylus PHOTO 950 Service Manual

EPSON Stylus PHOTO 950
1.3.5 Special settings mode
Special demise mode is chosen by pushing the next switch in (three seconds) in the
time when error indicator blinks after the power supply is turned on with pushing paper
switch and roll paper switch.
Table 1-8. Special settings mode
Switch
Paper Initialize EEPROM
Roll Paper
Reset the ink overflow counter in EEPROM
(Pushing for 10 seconds)
NOTE: (*1) Not described in the User's manual.
1. Initialize EEPROM
The operation procedure
Turn the printer on with the Roll Paper SW
pressed.
Release the Roll Paper SW.
Press the paper SW. (*2)
Paper and Ink indicators light for one second.
NOTE: (*2)Printer start normal mode if switch isn't pushed while LED is
blinking for 3 second.
PRODUCT DESCRIPTION
(*1)
Functions
ì
Response
Paper indicator and ink
indicator starts blinking
(blink 2).
Special setting mode is
finished, and printer restarts.
2. Reset the ink overflow counter in EEPROM
The operation procedure
Turn the printer on with the Roll Paper SW and
Paper SW pressed.
Release the Roll Paper SW.
Press the Paper SW and keep it pressed.
Paper and Ink indicators light for two
seconds.
NOTE: (*2)Printer start normal mode if switch isn't pushed while LED is
blinking for 3 second.
Printer Function
Revision A
Response
Paper indicator and ink
indicator starts blinking
(blink 2).
(*2)
(10 seconds later)
Power, paper and ink
indicators are lighted.
Special setting mode is
finished, and printer restarts.
20