Speaker Assembly - HP OMEN 17-cb0000 Maintenance And Service Manual

Speaker assembly

Table 6-5 Speaker assembly description and part number
Description
Speaker assembly (includes cushion)
Before removing the speaker assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the two Phillips M2.0 × 2.0 screws (2) that secure each speaker to the computer.
3. Remove cable that runs between the speakers from the clips along the bottom of the computer (3).
4. Remove the speaker assembly from the computer (4).
Reverse this procedure to install the speaker assembly.
42 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 38).
29).
30).
Spare part number
L57375-001