6
Removal and replacement procedures for
authorized service provider parts
IMPORTANT:
provider. Accessing these parts can damage the computer or void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
Component replacement procedures
There are as many as 47 screws that must be removed, replaced, and/or loosened when servicing the
computer. Make special note of each screw size and location during removal and replacement.
Thermal material
Table 6-1
Thermal material description and part number
Description
Thermal grease
Thermal pad kit
Thermal material must be applied on site and therefore is not included in component spare part kits. When
removing any part that also requires removal of the heat sink, be sure to order and apply thermal material.
Affected parts are shown in the following list:
Heat sink
●
System board
●
Top cover with keyboard
●
Display assembly
●
Components described in this chapter should only be accessed by an authorized service
Spare part number
L65268-001
L57444-001
Component replacement procedures
37