Hard Drive Assembly - HP OMEN 17-cb0000 Maintenance And Service Manual

Hard drive assembly

Table 5-4 Hard drive and connector descriptions and part numbers
Description
Hard drive, 2 TB, 5400 rpm
Hard drive, 1 TB, 7200 rpm
Hard drive connector/cable
Before removing the hard drive assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the hard drive assembly:
1. Disconnect the hard drive cable from the system board ZIF connector (1).
2. Remove the four Phillips M2.0 × 3.0 screws (2) that secure the hard drive assembly to the computer.
3. Lift the hard drive assembly out of the computer (3).
(Preparation for disassembly on page
Bottom cover on page
Battery on page 38).
29).
30).
Component replacement procedures
Spare part number
912487-850
766644-001
L57362-001
35