Touchpad Button Board - HP OMEN 17-cb0000 Maintenance And Service Manual

Touchpad button board

Table 6-6 Touchpad button board description and part number
Description
Touchpad button board
Before removing the touchpad button board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad button board:
1. Disconnect the cable from the ZIF connector on the touchpad (1).
2. Disconnect the cable from the ZIF connector on the system board (2).
3. Remove the four Phillips M2.0 × 3.0 screws (3) that secure the touchpad button board to the computer.
4. Remove the touchpad button board from the computer (4).
Reverse this procedure to install the touchpad button board.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 38).
29).
30).
Component replacement procedures
Spare part number
L57343-001
43