Solid-State Drive And Optane Memory Module - HP OMEN 17-cb0000 Maintenance And Service Manual

Solid-state drive and Optane memory module

Table 5-2 Solid-state drive and Optane memory module descriptions and part numbers
Description
1 TB, PCIe, Gen 3 × 4
512 GB, PCIe, Gen 3 × 4
512 GB, PCIe + 32 GB Optane memory
256 GB, PCIe, Gen 3 × 4
128 GB, PCIe, Gen 3 × 2
16 GB, PCIe, Gen 3 × 2 Optane memory module
Before removing the solid-state drive or Optane memory module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
The computer offers two solid-state drive sockets as shown in the following illustration:
(1) Primary solid-state drive
(2) Secondary solid-state drive
Remove the solid-state drive or Optane memory module:
1. Remove the Phillips M2.0 × 4.0 screw (1), and then lift the metal cover off the drive (2).
32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 38).
29).
30).
Spare part number
L57387-001
L57386-001
L57388-001
L57385-001
L57384-001
L57383-001