Advertisement
KNX/EIB
Flush-mounted bus coupler
4.2 Commissioning
Downloading the physical address and application software
The physical address is always assigned for only one device. Only one device may be in
programming mode at any one time.
Application module is not plugged in. Programming button and LED are accessible.
o
Press the programming button (2).
The programming LED (1) lights up.
o
Assign physical address.
The programming LED goes out.
o
Downloading the user software.
i Some application modules, e.g. push-button sensors, require that the application module is
plugged in before downloading. For details, see the corresponding instructions.
o
If present: plug in application module with frame. Do not damage the application interface.
5 Appendix
5.1 Technical data
KNX medium
Commissioning mode
Rated voltage KNX
Power consumption KNX
Application interface
Power output
Ambient conditions
Safety class
Ambient temperature
Storage/transport temperature
5.2 Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade.
Please submit or send faulty devices postage paid together with an error description to your
responsible salesperson (specialist trade/installation company/electrical specialist trade). They
will forward the devices to the Gira Service Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel +49(0)21 95 - 602-0
Fax +49(0)21 95 - 602-399
www.gira.de
info@gira.de
32503022
10499042 I00
25.05.2011
DC 21 ... 32 V SELV
max. 150 mW (with application module)
TP 1
S-mode
max. 100 mW
III
-5 ... +45 °C
-25 ... +70 °C
3/3
Advertisement
