Yamaha MTN850-A 2017 Service Manual page 85

1. Radiator fan cover
2. Air filter case
3. Clip
4. Air induction system hose (air filter case to air
cut-off valve)
5. Air induction system hose (air cut-off valve to
reed valve cover #1)
6. Air induction system hose (air cut-off valve to
reed valve cover #2/#3)
7. Air cut-off valve
8. Air cut-off valve holder
A. Install the air induction system hose (air filter
case to air cut-off valve) so that the tip of the
hose contacts the air filter case.
B. Insert the protrusion on the radiator fan cover
into the hole in the air cut-off valve holder.
C. Point the end of the clip for the air induction
system hose (air cut-off valve to reed valve
cover #2/#3) forward.
D. Point the end of the clip for the air induction
system hose (air filter case to air cut-off
valve) to the left.
E. 45
F. Point the end of the clip for the air induction
system hose (air cut-off valve to reed valve
cover #1) diagonally left forward.
G. Install the hose so that the tip of the hose
touches the protrusion of the pipe.
2-48
CABLE ROUTING