a
4. Adjust:
• Throttle grip free play
TIP
Prior to adjusting the throttle grip free play, throt-
tle body synchronization should be adjusted
properly.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Slide back the rubber cover.
b. Loosen the locknut "1".
c. Turn the adjusting nut "2" in direction "a" or "b"
until the specified throttle grip free play is ob-
tained.
Direction "a"
Throttle grip free play is increased.
Direction "b"
Throttle grip free play is decreased.
d. Tighten the locknut.
e. Slide the rubber cover to its original position.
TIP
Make sure that the adjusting nut is covered com-
pletely by the rubber cover.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS30816
CHECKING AND CHARGING THE BATTERY
Refer to "CHECKING AND CHARGING THE
BATTERY" on page 8-158.
EAS30662
CHECKING THE FUSES
Refer to "CHECKING THE FUSES" on page
1
2
a
b
PERIODIC MAINTENANCE
8-156.
EAS30664
ADJUSTING THE HEADLIGHT BEAMS
1. Adjust:
• Headlight beam (vertically)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
TIP
To adjust the headlight beam (vertically), insert
a phillips screwdriver into the hole "a" and turn
the adjusting screw.
a. Turn the adjusting screw "1" in direction "b" or
"c".
Direction "b"
Headlight beam is raised.
Direction "c"
Headlight beam is lowered.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Adjust:
• Headlight beam (horizontally)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
TIP
To adjust the headlight beam (horizontally), in-
sert a phillips screwdriver to the adjusting screw
"a" and turn the adjusting screw.
3-30
a
b
c
1
1
c
b