Yamaha MTN850-A 2017 Service Manual page 19

Drive mode display
1. Drive mode display
This display indicates which drive mode has
been selected: "STD", "A" or "B". For more de-
tails on the modes and on how to select them,
refer to "D-mode (drive mode)" on page 1-12.
TCS display
1. TCS display
This display indicates which traction control sys-
tem setting has been selected: "1", "2" or "OFF".
For more details on the TCS settings and on
how to select them, refer to "OUTLINE OF THE
TCS (Traction Control System)".
Multi-function display
1. Multi-function display
The multi-function display is equipped with the
following:
• an odometer
• two tripmeters
• a fuel reserve tripmeter
1
1
1
• an instantaneous fuel consumption display
• an average fuel consumption display
• a coolant temperature display
• an air intake temperature display
• a brightness control display
TIP
• The odometer will lock at 999999 and cannot
be reset.
• The tripmeters will lock at 9999.9 but can be
manually reset.
Push the "SELECT" button to switch the display
between the instantaneous fuel consumption
mode "km/L" or "L/100 km", average fuel con-
sumption mode "AVE_ _._ km/L" or "AVE_ _._
L/100 km", coolant temperature mode "C", air
intake temperature mode "Air_ _ C", odometer
mode "ODO", and tripmeter modes "TRIP 1" and
"TRIP 2" in the following order:
km/L or L/100 km  AVE_ _._ km/L or AVE_ _._
L/100 km  C  Air_ _ C  ODO  TRIP 1
 TRIP 2
When the display units have been set to miles:
km/L, L/100 km or MPG  AVE_ _._ km/L,
AVE_ _._ L/100 km or AVE_ _._ MPG  C 
Air_ _ C  ODO  TRIP 1  TRIP 2
TIP
Push the "RESET" button to switch the display in
the reverse order.
If the last segment of the fuel meter starts flash-
ing, the display automatically changes to the fuel
reserve tripmeter mode "F-TRIP" and starts
counting the distance traveled from that point. In
this case, push the "SELECT" button to switch
the display in the following order:
F-TRIP  km/L or L/100 km  AVE_ _._ km/L
or AVE_ _._ L/100 km  C  Air_ _ C  ODO
 TRIP 1  TRIP 2  F-TRIP
When the display units have been set to miles:
F-TRIP  km/L, L/100 km or MPG  AVE_ _._
km/L, AVE_ _._ L/100 km or AVE_ _._ MPG 
C  Air_ _ C  ODO  TRIP 1  TRIP 2 
F-TRIP
TIP
• To reset a tripmeter, select it by pushing the
"SELECT" button, and then push the "RESET"
button for one second.
1-10
FEATURES