Yamaha MTN850-A 2017 Service Manual page 103

1. Front brake hose assembly 1
2. Headlight assembly
3. Front wheel sensor lead
4. Clamp
5. Bracket
6. Front brake caliper assembly (right)
7. Brake hose 1
8. Front brake hose assembly 2
9. Horn
10.Front brake caliper assembly (left)
11.Front wheel sensor assembly
12.Front fork sub-assembly
13.Bracket 1
14.Stay 1
A. Make sure that the bracket has contact with
the axle bracket, and install it.
B. The blue paint should face to the outside of
the vehicle.
C. Vehicle forward direction
D. Inside of the vehicle
E. Insert the clamp securely.
F. Make sure the clamp is engaged by 3 or
more notches.
Engage the claws so that they face toward
the rear side of the vehicle.
G. Insert the clamp into the T-stud of the
bracket.
H. Route the front wheel sensor lead in front of
the vehicle along the brake hose.
I. Route the front wheel sensor lead in front of
the vehicle along the brake hose, and clamp
the white tape portion. The center line should
be within this area.
J. Right side of the vehicle
K. Insert the grommet of the front wheel sensor
lead.
L. Face the front wheel sensor lead to front side
of the vehicle with the front brake hose,
clamp at white tape point.
2-66
CABLE ROUTING