Yamaha MTN850-A 2017 Service Manual page 239

Disconnecting the leads and hoses
Order
Rider seat
Air scoop/Fuel tank cover/Rear side cover (left)
Fuel tank
Air filter case
Canister
Throttle bodies
Fuel rail
Front side panel
Radiator
Air cut-off valve
Footrest assembly (right)
Shift rod/Drive sprocket
1 Clutch cable
2 Starter motor lead
3 Negative battery lead
4 Ignition coil coupler
5 Coolant temperature sensor coupler
12 N ・ m (1.2 kgf ・ m, 8.7 lb ・ ft)
Job/Parts to remove
5
Q'ty
Refer to "GENERAL CHASSIS (1)" on page
4-1.
Refer to "GENERAL CHASSIS (1)" on page
4-1.
Refer to "FUEL TANK" on page 7-1.
Refer to "GENERAL CHASSIS (2)" on page
4-7.
Refer to "FUEL TANK" on page 7-1.
Refer to "THROTTLE BODIES" on page 7-5.
Refer to "THROTTLE BODIES" on page 7-5.
Refer to "GENERAL CHASSIS (1)" on page
4-1.
Refer to "RADIATOR" on page 6-1.
Refer to "AIR INDUCTION SYSTEM" on
page 7-15.
Refer to "REAR BRAKE" on page 4-37.
Refer to "CHAIN DRIVE" on page 4-82.
1 Disconnect.
1 Disconnect.
1 Disconnect.
3 Disconnect.
1 Disconnect.
5-4
ENGINE REMOVAL
3
7 N ・ m (0.7 kgf ・ m, 5.1 lb ・ ft)
Remarks
4
2
1