Ricoh FT2012 Operating Instructions Manual page 60

USER TOOLS
3
Press the D ark er key again. You
w ill find the last 2 digits of the
total copy quantity are displayed
on the copy counter.
Example:
When the counter is 12345, "45" is
displayed on the copy counter.
At that time, the right image density
indicator is lit.
When you want to see the first 2 dig-
its again, press the D arker key once.
When you want to see the second 2
digits, press the D arker key twice.
To access another user tool number,
press the Light er key.
To exit the user tools, turn off and on
the main sw itch.
10. Auto and manual image density level selection
If the im age density is too dark or too light after using the im aging unit for
a long tim e, adjust it using this function.
When you w ant to adjust the image density after installing a new imaging unit,
adjust it using "1. Image density level selection".
For how to change settings,
Default: Norm al (Setting: 0)
Setting
Definition Norm al
54
see page 47.
0 1
Light
2 3
Dark Lighter
4
Darker