Ricoh FT2012 Operating Instructions Manual page 6

WHERE TO PUT YOUR COPIER
Power Connection

WARNING: Only connect the copier to the power source described
M ake sure the plug is firmly inserted in the outlet.
Voltage m ust not fluctuate m ore than 10%.
Do not set anything on the pow er cord.
Always turn the copier off when you have finished copying for the day.
Access To Copier
Place the copier near the power source, providing clearance as shown.
vi
on the inside front cover of this manual. Avoid multi-
wiring as it could cause an electric shock or a fire.
Avoid using an extension cord. Make sure the wall out-
let is near the copier and freely accessible so that in
event of an emergency it can be unplugged easily.
More than 20 cm (7.9")
More than 20 cm
(7.9")
More than 40 cm
(15.8")