Ricoh FT2012 Operating Instructions Manual page 3

C
If any metal, liquid or foreign matter falls into the copier,turn
off the main switch and unplug the main power cord. Contact
your service representative. Do not keep using the copier with a
fault or defect.
>
Do not plug or unplug the power cord with wet hands or an
electric shock might occur.

Cautions:
C
When you move the copier, unplug the power cord from the
wall outlet to avoid fire or electric shock.
E
When you pull out the plug from the socket, grip the plug to
avoid damaging the cord and causing fire or electric shock.
>
Keep the copier away from humidity and dust. A fire or an
electric shock might occur.
Do not place the copier on an unstable or tilted surface. If it
topples over it could cause injury.
C
When the copier will not be used for a long time, unplug the
power cord.
@
If you use this copier in a confined space, make sure there is a
continuous air turnover.
?
When removing misfed paper, do not touch the fusing section
because it could be very hot.

This copier has been tested for safety using this supplier's parts
and consumable. We recommend you only use these specified
supplies.
iii