Ricoh FT2012 Operating Instructions Manual page 65

7
Push the forked end of the tool
onto the other wire (transfer
corona wire) — the round seal
should face upwards.
Note: Be sure to insert the cleaning
tool as shown in the illustration.
If you set the tool in the wrong
direction, the transfer corona
wire may be damaged.
..........................................................
8
Move the tool right to left a
few times.
..........................................................
9
Take the tool out from the
transfer corona wire and put
the tool to the hole right next
to the bypass feed entrance.
Keep this tool inside the m achine.
..........................................................
A
Remove paper on the imaging
unit and reset the im aging
unit.
The imaging unit is shaky if you
push it — there is no problem, it
does not "lock" in place.
MAINTAINING YOUR COPIER
59