Changing The Imaging Unit; How To Change The Imaging Unit - Ricoh FT2012 Operating Instructions Manual

CHANGING THE IMAGING UNIT

CHANGING THE IMAGING UNIT
When "iu" and the copy set number appear on the copy counter by
turns, it is time to change the imaging unit and the ozone filter (copying
is still possible). When "iu" is continuously displayed, copies cannot be
made until the imaging unit and the ozone filter are replaced.
Note: When you set the new imaging unit and the ozone filter, be
careful not to touch the blue material (OPC).
Note: Do not expose the imaging unit (especially the blue material) to
the light.

How to Change The Imaging Unit

1
Open the top unit.
To stop the top unit from spring-
ing up, keep one hand on it w hile
opening it.
..........................................................
2
Remove the used imaging unit
with the used toner bottle be-
ing careful not to spill the
toner.
Make sure to rem ove the im aging
unit to prevent
w hile moving the copier.
Do not shake the imaging unit to
the right or left.
..........................................................
3
Open the new im aging unit
cardboard box. Grasp the part
of the imaging unit as shown
opposite and pull it straight
out to remove the unit. Then
take out the unit from the sty-
rene foam.
spilling toner
CHANGING THE IMAGING UNIT
35