Ricoh FT2012 Operating Instructions Manual page 57

6. Auto reset time
As a default setting, the copier w ill reset itself 1 m inute after the final copy
is m ade or after the last tim e any key is pressed. If a 1 m inute reset tim e is
not appropriate, you can change this tim e.
For how to change settings,
Default: 1 m inute (Setting: 0)
Setting
Definition
.....................................................................................................................
7. Counter up/down
The copy counter can be set to show the num ber of copies m ade (count
up), or the num ber of copies rem aining to be m ade (count dow n).
For how to change settings,
Default: Up (Setting: 0)
Setting
Definition
.....................................................................................................................
8. Check the total copy counter
You can check the total num ber of copies m ade.
How t o check t he t ot al copy count er
1
Access user tool num ber "8".
You w ill find the first 2 digits of
the total copy quantity are dis-
played on the copy counter.
Example:
When 12345 copies are made, "01" is
displayed on the copy counter.
At that time, the center image density
indicator is lit.
see page 47.
0
1 minute 3 m inutes
see page 47.
0
Up
1
Auto reset is turned off.
1
Dow n
USER TOOLS
2
51