Ricoh FT2012 Operating Instructions Manual page 42

CHANGING THE IMAGING UNIT
4
Take out the new imaging unit
from the black bag horizon-
tally.
..........................................................
5
Put the used imaging unit into
the black bag horizontally not
to spill the toner.
Do not shake the im aging unit to
the right or left.
..........................................................
6
Remove the black paper from
the imaging unit and remove
the tape fixing the lever. Insert
the trailing part of the imaging
unit onto both hinges. Then,
put the other part of the unit
on the guide plate.
Do not push the imaging unit.
This unit is set only to put it on
the guide plate.
The im aging unit is shaky if you
push it — there is no problem , it
does not "lock" in place.
36