Table of Contents
Advertisement
SFP+
Maximum average receive power for
damage
Maximum receiver sensitivity in OMA
Maximum receiver reflectance
Stressed receiver sensitivity in OMA
Receiver electrical 3 dB upper cutoff
frequency
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown
for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shut down condition
10GBASE-ER/EW SFP+ specifications
The following table lists the transmitter and receiver specifications for the 10GBASE-ER/EW
SFP+. The reach for this SFP+ is up to 40 km at a wavelength of 1550 nm. The part number
of this SFP+ is AA1403013-E6.
For more information about the 10GBASE-ER/EW SFP+, including test and measurement
information and more specifications, see the IEEE 802.3ae standard.
Table 20: IEEE 802.3ae 10GBASE-ER/EW SFP+ specifications
Line rate (nominal)
Center wavelength range
Distance
Link optical power budget
Transmitter and dispersion power penalty
Transmitter characteristics
Launch power
Minimum side mode suppression ratio
Minimum launch power in OMA minus
transmission and dispersion penalty (TDP)
Minimum optical modulation amplitude
Maximum average launch power of OFF
transmitter
Minimum extinction ratio
Maximum RIN
58
Installation — SFP Hardware Components
Parameter
Parameter
OMA
12
Comments? infodev@avaya.com
Specifications
1.5 dBm
– 12.6 dBm
– 12 dB
– 10.3 dBm
12.3 GHz
Specifications
10GBASE-ER 10.3125 Gb/s ±100 ppm (10
GbE)
1530 to 1565 nm; nominal 1550 nm
Up to 40 km
15 dB
3.0 dB at 40 km
-– 4.7 to 4.0 dBm
30 dB
– 2.1 dBm
– 1.7 dBm
-– 30 dBm
3.0 dB
– 128 dB/Hz
December 2012
Advertisement
Table of Contents
