Avaya AA1419043-E6 Installation Manual page 31

warning, the system logs a message and generates a trap. The system maps DDM warning
and alarm messages into Warning and Fatal message categories for system logging purposes.
If you activate the ddm-alarm-portdown option, DDI shuts down the corresponding port if a
high or low alarm occurs on the port.
The following table lists and describes the Avaya SFP models the Virtual Services Platform
9000 supports. Unless otherwise noted, these SFPs support DDI.
Model
1000BASE-T
1000BASE-SX
1000BASE-LX
1000BASE-XD
1000BASE-ZX
1000BASE-BX-U
1000BASE-BX-D
1000BASE-EX
1000BASE CWDM
Installation — SFP Hardware Components
Supported on ROHS product
the 9024XL number
10GB card
No AA1419043-E6
Yes AA1419048-E6
Yes AA1419049-E6
Yes AA1419050-E6
Yes AA1419051-E6
Yes AA1419052-E6
No AA1419069-E6
No AA1419076-E6
No AA1419070-E6
No AA1419077-E6
No AA1419071-E6
Yes AA1419053-E6
Yes AA1419054-E6
Yes AA1419055-E6
Yes AA1419056-E6
Yes AA1419057-E6
Yes AA1419058-E6
Yes AA1419059-E6
Yes AA1419060-E6
No AA1419061-E6
No AA1419062-E6
Description
CAT5 UTP, up to 100 m.
Because the 1000BASE-T
device is all electrical, it does
not need DDI support.
850 (nm), up to 275 or 550 m
1310 nm, up to 10 km
1310 nm, up to 40 km
1550 nm, up to 40km (non-
CWDM)
1550 nm, up to 70 km (non-
CWDM)
1310nm up to 10km
1310nm up to 40km
1490nm up to 10km
1490nm up to 40km
1550 nm, up to 120 km (non-
CWDM)
1470 nm, up to 40 km
1490 nm, up to 40 km
1510 nm, up to 40 km
1530 nm, up to 40 km
1550 nm, up to 40 km
1570 nm, up to 40 km
1590 nm, up to 40 km
1610 nm, up to 40 km
1470 nm, up to 70 km
1490 nm, up to 70 km
December 2012
SFP transceivers
31