Table of Contents
Advertisement
Safety and equipment care
Do not allow the air extension tube to touch the bottom of the optical port.
Procedure
1. Remove dust or debris by blowing canned air into the optical port of the device using
2. Clean the optical port by inserting a wand moistened with alcohol into the receptacle
3. Dry the optical port by inserting a dry wand into the receptacle and rotating it.
4. Remove lint by blowing compressed air into the optical port.
5. Reconnect the optical connector and check for proper function.
28
Installation — SFP Hardware Components
the canned air extension tube.
and rotating it.
Use each cleaning wand to clean only one optical port.
Important:
Do not let the IPA evaporate; wipe it dry immediately. Alcohols can leave a residue
that is difficult to remove.
If you do not reinstall the connector, use a protective cap.
If problems persist, ensure that the connector or receptacle is free from damage.
Comments? infodev@avaya.com
December 2012
Advertisement
Table of Contents
