Table of Contents
Advertisement
SFP
To attain the BER of 10
is 15 dB.
Table 10: 1000BASE-EX DDI SFP specifications
Maximum electrical power consumption
Connectors
Cabling
Data rate
Line rate (8B/10B code)
Link optical power budget
Maximum dispersion power penalty
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum receiver power
1000BASE DDI CWDM 40 km SFP specifications
The 1000BASE SFPs provides CWDM gigabit Ethernet connectivity using single mode fiber.
These SFPs support full-duplex operation only.
Important:
For the 40 km CWDM SFPs, a minimum attenuation of 4 dB must be present between the
transmitter and receiver. To avoid receiver saturation, you must insert a minimum attenuation
of 4 dB when you test the CWDM SFP in loopback mode.
The following table describes specifications for 1000BASE DDI CWDM SFPs numbered
AA1419053-E6 to AA1419060-E6.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 4 dB of attenuation exists
between the transmit and receive ports.
Table 11: 1000BASE CWDM SFP DDI (40 km) specifications
Maximum electrical power consumption
42
Installation — SFP Hardware Components
-12
, the minimum attenuation between the transmit and receive ports
Parameter
Parameter
Comments? infodev@avaya.com
Specification
1.2 W
Duplex LC
SMF, 9 μm
1.0 Gb/s
1.25 Gb/s
30 dB
2.0 dB at 120 km
0 to 5.0 dBm
– 30 dBm
– 9.0 dBm
Specifications
1.0 W
December 2012
Advertisement
Table of Contents
