SFP+
4. Remove the dust cover from the SFP+ optical bores and insert the fiber optic
Job aid
Depending on the transceiver manufacturer, the SFP+ transceiver uses bail-latch type of
locking and extractor mechanism.
The following figure shows typical mechanism used on SFP+ transceivers; other locking and
extractor mechanisms exist. SFP+ transceivers are similar to SFPs in physical appearance.
In the following figure, the SFP+ uses the bore plug. Pull the bail to release the device.
50
Installation — SFP Hardware Components
Apply a light pressure to the SFP+ until the device clicks and locks into position in
the module.
cable.
Comments? infodev@avaya.com
December 2012