Table of Contents
Advertisement
SFP
Maximum dispersion power penalty
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum receiver power
100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mbit/s Ethernet Carrier Sense Multiple Access with
Collision Detection (CSMA-CD) connectivity using multimode optical fiber. The 100BaseFX
uses an LED transmitter. The centre wavelength, spectral width, and optical rise/fall time satisfy
the trade-off curves in the FDDI PMD document (ISO/IEC 9314–3:1900). The supported link
length is up to 2 km over MMF. The part number for this model is AA1419074–E6.
The following table describes the 100BASE-FX SFP specifications.
Table 13: 100BASE-FX SFP specifications
Maximum electrical power consumption
Connectors
Cabling
Distance
Wavelength
Link optical power budget
Transmitter characteristics
Transmitter type
Nominal wavelength
Transmit output power (max)
Transmit output power (min)
Spectral width
Minimum extinction ratio
Receiver characteristics
Receiver type
44
Installation — SFP Hardware Components
Parameter
Parameter
Comments? infodev@avaya.com
Specifications
2 dB at 70 km
0 to 5.0 dBm
– 24 dBm
– 3.0 dBm
Specifications
0.8 W
Duplex LC
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Up to 2 km using 500 Mhz-km MMF optic
cable
1300 nm
10 dB
LED
1300 nm
-14 dBm
-23.5 to —20 dBm
140 nm (FHWM)
10 dB
PIN photodiode
December 2012
Advertisement
Table of Contents
