Figure 12: AC connector
Opening for locking when inserting
1
To release: Push in snap-in nose
2
Union nut for strain relief
3
Connector housing
Opening for snap-in nose (on both sides).
4
For locking when mounting the connector
5
Contact insert
Insert the wires according to Figure 13: Assignment AC-
connector (connection side) into the screw connections in
the contact insert and screw tight.
i
Insert the contact insert into the connector housing. Both
parts must audibly snap into the snap-in noses at the
sides.
Subject to modification!
72
Ensure that the conductor is tightly fixed in the
connections.
Updated 10/2017