Setting The Grid Parameters For Gs Protection - Varta element Series Instruction Manual

8.10.6

Setting the grid parameters for GS protection

The grid parameters for GS protection have to be adjusted to the
requirements of the country in question.

Click on the Grid parameters tab.

The Grid parameters page will appear.

Change the settings - if necessary.
Setting: Automatic

Check the Automatic option.

Select the country for which the settings are to apply from
the dropdown list.

Click on Apply.
The Automatic setting uses the default values that are saved for the
selected country (see Table 12).
For the individual grid parameter settings, see Chapter 9.4.4.
Subject to modification!
100
Updated 10/2017