Damaged cables due to improper
assembly!
Electric shock!
11.5.1
Checking the operating state
Make sure that no contamination or material residues are
inside the device. Clean using a vacuum cleaner or similar if
necessary.
Switch the battery module back on.
Close the door and secure with screws.
Check whether the fuses have been re-connected.
Switch on the energy storage system using the On/Off button.
The button will be locked in the lower position.
Check whether the LED ring indicates the following operating
states after switch on:
Subject to modification!
WARNING
Check all assembly steps before
closing the energy storage system.
Do not use any force when closing the
energy storage system.
Updated 10/2017
149