Make sure that the
battery modules are switched off and no LED
indicator is lit.
Figure 31: Connections on the battery charger - front side
1
Comm 1 Warning and fault
2
Comm 2 RJ11 SOCKET (not used)
3
Comm 3 RJ45 SOCKET (communication)
4
Battery power 2 (must not be used)
5
Battery power 1
Push with a screwdriver into the side notches of the battery
charger.
Aid: Slotted screwdriver
Pull the battery charger approximately half-way out of the
compartment.
Plug off the cables at the rear.
Subject to modification!
Updated 10/2017
139