11 Service And Repair Work; Checking The Storage Cabinet From Outside; Checking The System Parameters (Service) - Varta element Series Instruction Manual

11 Service and repair work

This section is intended for the qualified
electrician.
11.1

Checking the storage cabinet from outside


Is the ventilation strip on the storage cabinet cover (see Figure
1) clogged/contaminated?
 The ventilation strip can be cleaned from inside once the
cover has been removed (see Chapter 11.4.7).

Is the room temperature between 5 °C and 30 °C assured
throughout the year (18 °C is the ideal temperature)?
 Clarify with the customer as to how the temperature in the
installation room can be maintained. If necessary, an active fan
has to be installed.

Does the storage cabinet stand firmly?
 Adjust, if necessary, using the screw feet.

Is the wall-mounting stable?
 Tighten or replace the screws as necessary.
11.2

Checking the system parameters (Service)

The system parameters are checked via the web interface. To do so,
please observe Chapter 9 and the service booklet.
Subject to modification!
128
Updated 10/2017