Table 14: Setting As Per Q(P) Characteristic - Varta element Series Instruction Manual

Table 14: Setting as per Q(P) characteristic


Time delay: Enter the time in s, after which the reactive
power is to be adjusted.

Minimum power: Enter the minimum power in %, up to
which the reactive current is not controlled.
Setting as per Q(U) characteristic

Reactive power function: Select Q(U) characteristic from
the drop-down list.

QUX1 to QUX4: Enter the settings for QUX1 to QUX4 by
using the numerical input fields. You can find the settings in
Figure 28.

QUY1 to QUY4: Enter the settings for QUY1 to QUY4 by
using the numerical input fields. You can find the settings
in Table 15.
Subject to modification!
Updated 10/2017
121