Warranty; Packaging List; Safety Precautions - VWR Peqlab PerfectBlue Mini S Instruction Manual

Instruction Manual PerfectBlue

WARRANTY

VWR guarantees that the horizontal electrophoresis system you have received has been thoroughly test-
ed and meets its published specification.
However, immediately upon arrival, please check carefully that the shipment is complete and has not
been damaged in transit. For missing parts or to report any kind of damage, please contact VWR (see
'TECHNICAL SUPPORT AND ORDERING INFORMATION'). Please retain all packaging materials until
the delivery has been completely checked since this will speed up the return of goods if required and
reduce environmental impact. Any form of returns, replacements or credit notes must be agreed in ad-
vance by VWR.
For the complete range of PerfectBlue
ty period of 36 months if the products have been used solely according to the instruction manual unless
a different warranty has been offered in writing. No liability is accepted for loss or damage arising from
incorrect use. VWR's liability is limited to the repair or replacement of the unit or refund of the purchase
price, at VWR's discretion. VWR is not liable for any consequential damages. After the warranty period
has expired, VWR can offer repairs.
VWR reserves the right to alter the technical specifications of the PerfectBlue
systems without prior notice. This will enable us to implement developments as soon as they arise.

PACKAGING LIST

Unless requested otherwise, the following items are included in shipment for the models PerfectBlue™
Mini S, Mini M, Mini L and Mini L 'Revolution':
one buffer chamber with corrosion-protected platinum electrodes
one safety lid with attached power cords
one UV-transmissible gel tray with gaskets
Mini S: 2 combs,1.5 mm thick, 6 and 10 teeth
Mini M: 2 combs, 1.5 mm thick, 10 and 14 teeth
Mini L ('Revolution'): 2 combs, 1.5 mm thick, 12 and 20 teeth
User Manual

SAFETY PRECAUTIONS

Please, read this Instruction Manual carefully before using the gel system.
Only use a CE marked DC power supply.
Always disconnect the gel system from the power supply before removing the safety lid.
Always disconnect the gel system from the power supply when it is not in use or before moving it.
Running conditions for this unit should not exceed the maximum operating voltage or current.
Do not fill the chamber with running buffer above the maximum fill line.
The buffer ascending tube at the lower side of the Mini L 'Revolution' gel chamber may not be used
as a carry handle as it does not resist mechanical forces in perpetuity.
VWR_v0617_E
Horizontal Mini Gel Systems
TM
™ electrophoresis and blotting systems, VWR guarantees a warran-
2
™ electrophoresis or blotting