Standard Compliance; Storage - Delta Amplon MBB RT Series User Manual

least one hour to avoid moisture condensing inside the MBB.
• Do not pour and splash any liquid on the MBB. Do not insert any object into
the MBB's slits and openings. Do not put beverage containers on or around
the MBB.
• Do not apply any cleaning liquid or cleaning spray to the MBB. Before
cleaning, please make sure that the input power cables have been
unplugged.
• All maintenance services must be performed by qualified service personnel.
• Forbid opening or removing the cover of the MBB by yourself to avoid high
voltage electric shock.
• You must contact qualified service personnel if either of the following events
occurs:
1. Liquid is poured or splashed on the MBB.
2. The MBB does not run normally after the instructions in this User Manual
are carefully observed.

2.2. Standard Compliance

 IEC/EN 62040-1

2.3. Storage

• Prior to installation
If the MBB needs to be stored prior to installation, it should be placed in a
dry area. The allowable storage temperature and relative humidity (non-
condensing) are -15°C ~ +55°C and 5 ~ 95% respectively.
• After usage
Remove all equipment from the MBB, and store the MBB in a dry and well-
ventilated area at a temperature between -15°C and +55°C and at a relative
humidity (non-condensing) between 5 ~ 95%.
Amplon RT Series
5